WIRELESS ALARM SET TYPE: ZAM⁠-⁠350

ZAM-350 alarm set is a simple security system, preventing unauthorized access to rooms. Thanks to the battery power supply and wireless technology, you can place individual elements of the system in selected places of the secured facility in a simple and non-invasive way. Triggering one of the sensors (motion detectors, door or window opening sensors) activates a loud alarm signal in the alarm panel and a relevant LED on the panel lights up, indicating which sensor was triggered (providing the user with information in which room the problem occurred). Up to 2 remote controls and 6 sensors can be programmed into one alarm panel. The range of the system (max. distance between the alarm panel and the sensors) is about 100 m in open area. The alarm panel may also work in a signalling mode, sending a short sound to notify about intrusion when one of the sensors is activated, instead of triggering an alarm signal. The device then works as an entry signalling bell that can be used in shops, hotel reception desks, warehouses - in places where the staff may be temporarily present in a different room than a customer and there is a need to notify them about an entry. You can use the buttons on the alarm panel or remote controls to switch between alarm mode and signalling mode and to arm and disarm the alarm system. The kit includes: alarm panel, 2 remote controls, motion detector and door opening sensor (reed switch). The following additional sensors for the system can be purchased separately: ZAM-350/R - wireless motion detector ZAM-350/K - Wireless reed door opening sensor