TYPE: CTW-02

CARBON MONOXIDE DETECTOR 230 V TYPE: CTW⁠-⁠02

CARBON MONOXIDE DETECTOR 230 V  TYPE: CTW⁠-⁠02
Carbon monoxide is commonly referred to as carbon monoxide gas is highly toxic, colorless and odorless, easily spreading in the air. Arises as a result of incomplete combustion of fuels such as wood, oil, gas, gasoline, kerosene, propane, coal, oil. Since this gas is colorless and odorless, so it is important to early detection of dangerous concentrations of carbon monoxide in the rooms where we spend as it creates a serious risk to human health and life. Protect himself and his family prior to the silent killer !! CTW-sensor 01 is used for continuous monitoring of a dangerous concentration of carbon monoxide in air. Upon detection of a dangerous concentration of device activates audible and visual alarm. A battery-powered device is easy to place anywhere because we do not carry out any installation.It is equipped with advanced electrochemical sensor and a diagnostic system that signals the failure of the sensor and discharging the battery. It is additionally equipped with display showing the concentration of carbon monoxide and an item sensor messages informacyjne.Każdy rock produced by ZAMEL is tested in a specialized test chamber and receives a certificate of correct operation (detection of carbon monoxide concentration at a level of 300ppm in less than 3 minutes).Each copy of carbon monoxide sensors manufactured by ZAMEL is tested in a specialized test chamber and receives a certificate of correct operation (detection of carbon monoxide concentration at a level of 300ppm in less than 3 minutes).Each copy of carbon monoxide sensors manufactured by ZAMEL is tested in a specialized test chamber and receives a certificate of correct operation (detection of carbon monoxide concentration at a level of 300ppm in less than 3 minutes).
  • solid-state sensor
  • solid-state sensor
  • buzzer alarm (80dB)
  • buzzer alarm (80dB)
  • power supply AC 230 V
  • power supply AC 230 V
  • optical signaling alarm
  • optical signaling alarm
  • signaling the end of life failure or sensor (system diagnostic)
  • signaling the end of life failure or sensor (system diagnostic)
  • tested in Poland certificate correctly detecting the concentration of 300 ppm in less than 3 minutes
  • tested in Poland certificate correctly detecting the concentration of 300 ppm in less than 3 minutes
  • Carbon monoxide detection levels (according to PN-EN50291-1: 2010): • 50 ppm (up to 90 minutes) • 100 ppm (up to 40 minutes) • 300 ppm (up to 3 minutes)
  • Carbon monoxide detection levels (according to PN-EN50291-1: 2010): • 50 ppm (up to 90 minutes) • 100 ppm (up to 40 minutes) • 300 ppm (up to 3 minutes)
Technical data
Mounting method Montaż natynkowy
Volume 80 dB(A)
Standalone Tak
Degree of protection (IP) IP20
Place variable Nie
Current supply primary Zasilanie sieciowe
With digital display Nie
Sensor type półprzewodnikowy
Number of batteries 0 st
Supply voltage 230 V
Temperature range of operation 0/45 °C
CE certificate Yes
Battery type brak
Optical signaling Yes
Moisture working range 10%/95% RH
Minimum level of carbon monoxide detection 50 ppm
Certified level of carbon monoxide detection 300 ppm
Device diamentions 110 x 40 x 70 mm
Commercial data
Colour Biały
Size of the package 175 x 225 x 45 mm
Quantity in bulk package 8 st
Gross weight 0,347 kg
Recommended accessories